UV DTF GANGSHEET BUILDER

• File Format: Preferred file formats include vector files (such as .ai, .eps, .svg) or high-resolution raster files (such as .psd, .png, .jpeg).
• Resolution: For raster files, ensure a minimum resolution of 300 DPI (dots per inch) at the intended print size to maintain sharpness and clarity.
• Color Mode: Artwork should be in CMYK color mode for accurate color reproduction. Avoid using RGB color mode, as it may result in color discrepancies.
• Color Profile: Use standard color profiles such as sRGB or Adobe RGB to ensure consistency between the digital artwork and the printed output.
• Bleed: Include a bleed area of at least 0.125 inches (3.175 mm) around all edges of the artwork to account for minor variations in printing and trimming.
• Layers and Transparency: Flatten any layers and ensure that transparency is flattened or removed to prevent unexpected results during printing.
• Text and Fonts: Convert all text to outlines or provide the font files used in the artwork to avoid font substitution issues.
• File Naming: Use descriptive file names that indicate the content and purpose of the artwork for easy identification and organization.

Using a Heat Press:

1. Prepare Your Heat Press: Ensure your heat press is set up correctly and preheated to 148°C (298°F), the recommended temperature for the fabric you're using.
2. Position the Transfer: Place the DTF transfer onto the garment with the printed side facing down (adhesive side facing up). Position it in the desired location, ensuring it's straight and centered.
3. Cover with a Heat-Resistant Sheet: Place a heat-resistant sheet or parchment paper over the transfer to protect it from direct heat and prevent scorching.
4. Apply Heat and Pressure: Close the heat press and apply firm pressure for the recommended duration, typically 10 seconds. The ideal time and pressure settings may vary depending on your specific heat press and transfer materials. Refer to the instructions provided with your DTF transfers for guidance.
5. Peel Off the Liner: Once the pressing time is complete, carefully lift the heat press and peel off the liner while the transfer is still warm. Be cautious not to disturb the design or the garment.
6. Cool and Inspect: Allow the garment to cool completely before handling or wearing it. Once cooled, inspect the transferred design to ensure it adhered properly and without any imperfections.
7. Repeat if Necessary: If pressing multiple transfers onto the same garment (e.g., ganged sheets), repeat the process for each transfer, ensuring proper alignment and spacing between designs.

Using a Clothing Iron:

1. Set Your Iron: Adjust your clothing iron to the cotton setting without steam, which typically corresponds to around 148°C (298°F).
2. Position the Transfer: Place the DTF transfer onto the garment with the printed side facing down (adhesive side facing up). Position it in the desired location, ensuring it's straight and centered.
3. Cover with a Heat-Resistant Sheet: Place a heat-resistant sheet or parchment paper over the transfer to protect it from direct heat and prevent scorching.
4. Apply Heat and Pressure: Press the iron firmly onto the transfer area for about 10-15 seconds, applying consistent pressure and moving the iron in circular motions to ensure even heat distribution.
5. Peel Off the Liner: Once the pressing time is complete, carefully peel off the liner while the transfer is still warm. Be cautious not to disturb the design or the garment.
6. Cool and Inspect: Allow the garment to cool completely before handling or wearing it. Once cooled, inspect the transferred design to ensure it adhered properly and without any imperfections.

Washing: Turn the garment inside out before washing to protect the transfer. Wash in cold water using a gentle cycle.

Detergent: Use mild detergent to avoid harsh chemicals that may damage the transfer.

Drying: Hang the garment to air dry whenever possible. Avoid using a dryer, especially on high heat settings, as it can cause the transfer to crack or peel.

Ironing: If ironing is necessary, iron the garment inside out on a low heat setting. Avoid ironing directly over the transfer to prevent damage.

Dry Cleaning: Dry cleaning is not recommended for garments with DTF transfers, as the chemicals used in the process may affect the transfer.

Storage: Store garments with DTF transfers in a cool, dry place away from direct sunlight to prevent fading or discoloration.